DSC Evolution Alarm Remote Control

DSC-Evolution-Alarm-Remote

 

Sherlotronics Alarm / Gate / Garage Remote Control

Sherlotronics is a superior quality remote control product, which offers exceptional range of controls for many different applications.

FEATURES

  • Code-Hopping Encryption
  • Unique TX Clip Antenna design increases operating range by 50%
  • Crystal controller +/- 100KHz
  • 12V Alkaline battery: GP23AE
  • Typically 2 years battery life or 20,000 activations
  • LED flashes when the battery is low
  • Monoprene Rubber-like buttons are easy to press and click positively 

APPLICATIONS

  • Gate & Garage Door Access Control
  • Panic Activations
  • Arming / Disarming Alarm systems
  • Switching On / Off lights
  • Switching On / Off Generators

 

Long-Range 500m Receiver

Available in either Single Channel or 4-Channel.

The unit is weatherproof and is supplied with a rubber duck antenna.

This product is suitable for larger sized properties needing the ultimate

in performance, quality and range.

 

 

 

 

 

Fixed Panic Panel

Designed to be wired to a static hardwired panic button as well as Remote panic buttons. When a Panic is activated the unit will trigger the 3 Minute siren output, Radio output as well as a Latching Strobe output. All activations can be reset via either the Remote control or the Hardwired Panic button. Our Low battery cutout @ 10V DC will safeguard the battery from deep discharge.

Features

  • Code hopping Encryption
  • Latch or Momentary
  • Selectable Momentary times
  • 1 Sec; 3Sec; 1min; 3min; ON/OFF
  • Buzzer tone
  • Crystal Controlled +/- 100KHz
  • Frequencies: 403MHz / 433MHz
  • 12 – 24V AC/DC input
  • Weatherproof housing

Applications

  • Gate & Garage Door Access Control
  • Panic Activations
  • Arming / Disarming Alarm systems
  • Switching On / Off lights
  • Switching On / Off Generators

 

E.T Systems Remote Control

ET-Blu Mix Rolling Code Transmitters

Features:

  • Enhanced rolling code
  • Backward compatible
  • Fully compatible with E.T. rolling code receivers and ET Products
  • Multifunctional and versatile
  • Can be used to automate:
    • Magnetic Locks
    • Garage and gate motors
    • Alarms
    • Pool pumps
  • Can program each button individually
  • Stylish and compact design
  • Durable and robust
  • Colour coded buttons for user friendliness

 

Paradox Remote Controls

REM3
Hand-Held Two-Way Remote Keypad

Features
  Compatible with MG5000, MG5050, and Spectra SP series V3.00 (or higher) and RTX3 V1.31 (or higher)
  Supports StayD
  System Status Memory: The REM3 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status–even when out of range. Used to confirm the last action you did on the system while away from the system.
  Configure which partitions the REM3 arms/disarms
  Built-In Transceiver (433MHz or 868MHz)
  Independent Arm, Sleep, Stay and Off buttons and LED display per partition
  Control up to 6 PGMs and/or generate panics
  Keypad Mode: Requires code entry
Remote Mode: One-touch arming / Disarming
  Installer Diagnostic Mode:
Partition 1 LEDs = Signal Strength Display
Partition 2 LEDs = RF Interference Display
  Provides visual and auditory feedback of system status
  Press the Status button to receive system status
  Label to identify remote control owner
  Compact, water-resistant design
  Size: 8cm x 3.4cm x 1.5cm (3.1in x 1.3in x 0.6in)

 

REM2 (formerly MG-REM2)
MAGELLAN 2-Way Remote Control with Backlit Buttons

Features
  Supports StayD (Version 2.0 or higher)
  System Status Memory: The REM2 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status–even when out of range. Used to confirm the last action you did on the system while away from the system.
  Built-in transceiver (433MHz or 868MHz)
  Displays system status using visual (LED) and auditory feedback
  Press the Status button at any time to receive the system status
  Perform up to 6 different actions per remote control
  Compact, water-resistant design with backlight for buttons
  Wireless range in a typical residential environment:
  – 30m (100ft)
  – 45m (150ft)

 

REM15
Remote Control with Backlit Buttons

Features
  Slim, ergonomic design
  Water resistant
  Perform up to 5 different actions
  Wireless range in a typical residential environment:
  – 30m (100ft) with all-in-one consoles and RX1
  – 45m (150ft) with MG5000 / MG5050
  – 60m (200ft) with RTX3
  Available in 433MHz or 868MHz